نمایش نتایج جستجو برای
نام مجله: Powder Technology
موارد یافت شده: 39
1 - Effects of CuO nano powder on performance improvement and entropy production of double-pipe heat exchanger with innovative perforated turbulators (چکیده)2 - Production of calcium nitrate crystals via membrane distillation crystallization using polyvinylidene fluoride/sorbitan trioleate membranes (چکیده)
3 - CFD approach for two-phase CuO nanofluid flow through heat exchangers enhanced by double perforated louvered strip insert (چکیده)
4 - Alignment of functionalized multiwalled carbon nanotubes in forward osmosis membrane support layer induced by electric and magnetic fields (چکیده)
5 - Instability of saturated granular materials in biaxial loading with polygonal particles using discrete element Method (DEM) (چکیده)
6 - An experimental study on heat transfer performance and pressure drop of nanofluids using graphene and multi-walled carbon nanotubes based on diesel oil (چکیده)
7 - Numerical investigation of turbulent Cu-water nanofluid in heat exchanger tube equipped with perforated conical rings (چکیده)
8 - Influences of mechanical activation and heating rate on reaction processes in combustion synthesis of NiAl-Al2O3 composites (چکیده)
9 - Cu-water nanofluid flow and heat transfer in a heat exchanger tube equipped with cross-cut twisted tape (چکیده)
10 - Dichlorodimethylsilane mediated one-step synthesis of hydrophilic and hydrophobic silica nanoparticles (چکیده)
11 - Calcium carbonate fouling on double-pipe heat exchanger with different heat exchanging surfaces (چکیده)
12 - In-situ synthesis and characterization of nano-structured NiAl-Al2O3 composite during high energy ball milling (چکیده)
13 - An experimental investigation on stable arch formation in cohesionless granular materials using developed trapdoor test (چکیده)
14 - The effect of TiC:CNT mixing ratio and CNT content on the mechanical and tribological behaviors of TiC modified CNT-reinforced Al-matrix nanocomposites (چکیده)
15 - Effect of Magnetized Ethanol on the Shape Evolution of Zinc Oxide from Nanoparticles to Microrods: Experimental and Molecular Dynamic Simulation Study (چکیده)
16 - Comparison of experimental data, modelling and non-linear regression on transport properties of mineral oil based nanofluids (چکیده)
17 - Numerical investigation of heat exchanger effectiveness in a double pipe heat exchanger filled with nanofluid: A sensitivity analysis by response surface methodology (چکیده)
18 - A two-way couple of Eulerian-Lagrangian model for particle transport with different sizes in an obstructed channel (چکیده)
19 - Exact-solution of entropy generation for MHD nanofluid flow induced by a stretching/shrinking sheet with transpiration: Dual solution (چکیده)
20 - Synthesis of TiC coating on Ti substrate using pulsed laser deposition and mechanical milling techniques along with statistical modeling of the process by response surface methodology (چکیده)
21 - Increment of mixed convection heat transfer and decrement of drag coefficient in a lid-driven nanofluid-filled cavity with a conductive rotating circular cylinder at different horizontal locations: A sensitivity analysis (چکیده)
22 - Numerical simulation and sensitivity analysis of effective parameters on heat transfer and homogeneity of Al2O3 nanofluid in a channel using DPM and RSM (چکیده)
23 - Preparation of titanium dioxide nanoparticles supported on hexagonal mesoporous silicate (HMS) modified by oak gall tannin and its photocatalytic performance in degradation of azo dye (چکیده)
24 - Experimental investigation of nanofluid free convection over the vertical and horizontal flat plates with uniform heat flux by PIV (چکیده)
25 - A novel method for enhancing interface strength of TiC coated layer/Ti substrate (چکیده)
26 - Fabrication of nanocrystalline TiC coating on AISI D2 steel substrate via high-energy mechanical alloying of Ti and C (چکیده)
27 - Physical and mechanical properties of porous copper nanocomposite produced by powder metallurgy (چکیده)
28 - A micromechanical study on the stress rotation in granular materials due to fabric evolution (چکیده)
29 - Structural and optical properties of (K,Na)NbO3 nanoparticles synthesized by a modified sol–gel method using starch media (چکیده)
30 - Synthesis of mullite–MoSi2 nano-composite through a mechanochemical processing (چکیده)
31 - Analytical modeling of entropy generation for Casson nano-fluid flow induced by a stretching surface (چکیده)
32 - Experimental investigation and characterization of an efficient nanopowder-based flame retardant coating for atmospheric-metallic substrates (چکیده)
33 - Entropy analysis for an unsteady MHD flow past a stretching permeable surface in nano-fluid (چکیده)
34 - Structural, electrical, and rheological properties of palladium/silver bimetallic nanoparticles prepared by conventional and ultrasonic-assisted reduction methods (چکیده)
35 - Comparative study between metal oxide nanopowders on thermal characteristics of nanofluid flow through helical coils (چکیده)
36 - The novel, one step and facile synthesis of ZnO nanoparticles using heteropolyoxometalates and their photoluminescence behavior (چکیده)
37 - Silver colloid nanoparticles: Ultrasound-assisted synthesis, electrical and rheological properties (چکیده)
38 - Fabrication of FeNi–Al2O3 nanocomposites and optimization of mechanical properties using Taguchi method (چکیده)
39 - Development and verification of a mathematical model for variations of the specific surface area of mineral powders during intensive grinding (چکیده)
